| dc.contributor.author | Mayooran Sivapathasundaram | |
| dc.contributor.author | Mahen Mahendran | |
| dc.date.accessioned | 2017-12-16T09:00:02Z | |
| dc.date.available | 2017-12-16T09:00:02Z | |
| dc.date.issued | 2016 | |
| dc.identifier.other | %28ASCE%29ST.1943-541X.0001476.pdf | |
| dc.identifier.uri | http://138.201.223.254:8080/yetl1/handle/yetl/4237256 | |
| dc.description.abstract | The roofing systems of low-rise buildings are commonly made of thin, high-strength steel roof sheeting and battens. These light-gauge steel roofing systems are subjected to high-wind uplift loads during tropical cyclones and thunderstorms. In recent times, roof batten–to–rafter or truss connection failures have been identified as a major cause of severe roof failures during high-wind events. Most of these connection failures are in the form of localized pull-through failures of the bottom flanges of steel roof battens at their screw connections. The design practice at present is based on expensive and time-consuming full-scale tests or inappropriate small-scale tests. Hence, there is an urgent need to develop suitable test methods to determine the pull-through capacity of roof battens. This paper presents the details of an experimental study undertaken to investigate pull-through failures of light-gauge steel roof battens using both full-scale and small-scale tests. The investigation showed that the design capacity equations and test methods given in current cold-formed steel design standards for single-screw connections cannot be used for roof batten pull-through failures. This paper recommends suitable small-scale test methods and associated calculation methods to determine the pull-through capacities of roof battens. | |
| dc.publisher | American Society of Civil Engineers | |
| dc.title | Development of Suitable Test Methods for the Screw Connections in Cold-Formed Steel Roof Battens | |
| dc.type | Journal Paper | |
| dc.journal.volume | 142 | |
| dc.journal.issue | 6 | |
| dc.journal.title | Journal of Structural Engineering | |
| dc.identifier.doi | 10.1061/(ASCE)ST.1943-541X.0001476 | |
| dc.tree | Journal of Structural Engineering:;2016:;Volume ( 142 ):;issue: 006 | |
| dc.contenttype | Fulltext | |