Show simple item record

dc.contributor.authorLavan Sundararajah
dc.contributor.authorMahen Mahendran
dc.contributor.authorPoologanathan Keerthan
dc.date.accessioned2017-12-16T08:59:53Z
dc.date.available2017-12-16T08:59:53Z
dc.date.issued2016
dc.identifier.other%28ASCE%29ST.1943-541X.0001523.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4237228
dc.description.abstractLipped channel beams (LCBs) are commonly used as flexural members such as floor joists and bearers in the construction industry. These thin-walled LCBs are subjected to specific buckling and failure modes, one of them being web crippling. Despite considerable research in this area, some recent studies have shown that the current web crippling design rules are unable to predict the test capacities under end-two-flange (ETF) and interior-two-flange (ITF) load conditions. In many instances, web crippling predictions by the available design standards such as AISI S100, AS/NZS 4600 and Eurocode 3 Part 1-3 are inconsistent, i.e., unconservative in some cases, although they are conservative in other cases. Hence, experimental studies consisting of 36 tests were conducted in this research to assess the web crippling behavior and capacities of high-strength LCBs under two-flange load cases (ETF and ITF). Experimental results were then compared with the predictions from current design rules. Comparison of the ultimate web crippling capacities from tests showed that the design equations are very unconservative for LCB sections under the ETF load case and are conservative for the ITF load case. Hence, improved equations were proposed to determine the web crippling capacities of LCBs based on the experimental results from this study. Current design equations do not provide the direct strength method (DSM) provisions for web crippling. Hence, suitable design rules were also developed under the DSM format using the test results and buckling analyses using finite-element analyses.
dc.publisherAmerican Society of Civil Engineers
dc.titleExperimental Studies of Lipped Channel Beams Subject to Web Crippling under Two-Flange Load Cases
dc.typeJournal Paper
dc.journal.volume142
dc.journal.issue9
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001523
dc.treeJournal of Structural Engineering:;2016:;Volume ( 142 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record