Show simple item record

dc.contributor.authorKuangyi Zhang
dc.contributor.authorZhi Fang
dc.contributor.authorAntonio Nanni
dc.date.accessioned2017-12-16T08:59:49Z
dc.date.available2017-12-16T08:59:49Z
dc.date.issued2016
dc.identifier.other%28ASCE%29ST.1943-541X.0001535.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4237218
dc.description.abstractResearch works related to the fiber-reinforced polymer (FRP) tendons have focused on the anchor system, but the anchor is not the only contribution to performance. Since civil structures require tendons consisting of multiple rods (e.g., cables, suspenders in bridges, or rock bolts in ground anchors), the characteristics of multirod tendons require targeted research. This paper presents a study on the behavior of tendons with multiple carbon FRP (CFRP) rods. Four specimens including two cable-type assemblies (TA12-9 and TA12-20) and two ground anchors (GA12-9 and GA12-20) with large-tonnage capacities were built and tested. Using strain gauges set along individual rods, the nonuniform force distribution among individual rods was observed and is discussed. The test results showed that nonuniformity is a recurring feature of a multirod tendon, with the variation in the initial length of the rods caused by installation error as its main reason. Based on the premise that tension in multiple rods obeys a normal distribution, the relationship between the nonuniformity coefficient, η, and a corresponding capacity reduction coefficient, λ, was established. The tendon consisting of nine CFRP rods in TA12-9 (GA12-9) shows a capacity reduction factor of 0.83 (0.89), while the capacity reduction factor of the tendon consisting of 20 rods in TA12-20 (GA12-20) decreases to values of 0.79 (0.87).
dc.publisherAmerican Society of Civil Engineers
dc.titleBehavior of Tendons with Multiple CFRP Rods
dc.typeJournal Paper
dc.journal.volume142
dc.journal.issue10
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001535
dc.treeJournal of Structural Engineering:;2016:;Volume ( 142 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record