Show simple item record

dc.contributor.authorChristopher J. Motter
dc.contributor.authorDavid C. Fields
dc.contributor.authorJohn D. Hooper
dc.contributor.authorRon Klemencic
dc.contributor.authorJohn W. Wallace
dc.date.accessioned2017-12-16T08:59:02Z
dc.date.available2017-12-16T08:59:02Z
dc.date.issued2017
dc.identifier.other%28ASCE%29ST.1943-541X.0001671.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4237090
dc.description.abstractUsing test results presented in previous studies, design and modeling recommendations for steel-reinforced concrete (SRC) coupling beams are provided for both code-based (prescriptive) design approaches and performance-based design approaches. Procedures for computing both nominal and expected (upper bound) moment and shear strengths are described. For embedment, a capacity design approach is recommended in which the provided embedment strength exceeds the expected beam strength. Two approaches are recommended for determination of effective stiffness, one based on using a rigid beam (for flexure and shear) along with an interface rotational spring, since test results from the literature indicate that the majority of the coupling-beam deformations were associated with interface slip/extension, and an alternative approach where the effective stiffness is based on the beam aspect ratio or beam length. Additional parameters are provided to define deformation capacity at significant strength loss (to complete the backbone relations) and to address cyclic degradation.
dc.publisherAmerican Society of Civil Engineers
dc.titleSteel-Reinforced Concrete Coupling Beams. II: Modeling
dc.typeJournal Paper
dc.journal.volume143
dc.journal.issue3
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001671
dc.treeJournal of Structural Engineering:;2017:;Volume ( 143 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record