Show simple item record

dc.contributor.authorXilin Lu
dc.contributor.authorXiangliang Dang
dc.contributor.authorJiang Qian
dc.contributor.authorYing Zhou
dc.contributor.authorHuanjun Jiang
dc.date.accessioned2017-12-16T08:59:01Z
dc.date.available2017-12-16T08:59:01Z
dc.date.issued2017
dc.identifier.other%28ASCE%29ST.1943-541X.0001673.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4237088
dc.description.abstractThis paper introduces a new design form for prestressed shear walls with horizontal bottom slits utilizing cast-in-place technology. Horizontal slits are placed symmetrically at the wall-foundation interface of prestressed shear walls while the concrete in the middle of the wall width remains connected with the foundation. Furthermore, unbonded prestressed tendons inside the wall are adopted to provide self-centering ability. Tests on prestressed self-centering shear walls with horizontal bottom slits under cyclic loading were conducted to investigate their seismic performance. Test results were analyzed from the tests, and a comparison was made among traditional shear wall and self-centering shear walls with horizontal bottom slits of different configurations. The experimental results indicate that the tested cast-in-place shear walls exhibit excellent self-centering ability with the lateral load capacity similar to traditional shear walls. The quantity and distribution range of the cracking in the walls were significantly reduced, to the advantage of damage reduction. The flexural/shear deformations and the strains of the walls were limited to a very low level as the deformations were concentrated at the bottom of the shear walls. According to the results of the tests, an analysis method was presented to calculate the flexural strength of the proposed shear walls.
dc.publisherAmerican Society of Civil Engineers
dc.titleExperimental Study of Self-Centering Shear Walls with Horizontal Bottom Slits
dc.typeJournal Paper
dc.journal.volume143
dc.journal.issue3
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001673
dc.treeJournal of Structural Engineering:;2017:;Volume ( 143 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record