Show simple item record

dc.contributor.authorMichael G. Gray
dc.contributor.authorConstantin Christopoulos
dc.contributor.authorJeffrey A. Packer
dc.date.accessioned2017-12-16T08:58:56Z
dc.date.available2017-12-16T08:58:56Z
dc.date.issued2017
dc.identifier.other%28ASCE%29ST.1943-541X.0001692.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4237071
dc.description.abstractThe yielding brace system (YBS) is a seismic-resistant concentrically braced frame system that provides a fully symmetric hysteretic response via flexural yielding of cast steel triangular yielding fingers of a specially designed yielding connector. The behavior of the system is first reviewed, and a detailed discussion of the limit states design of a YBS braced frame is presented. Results of two full-scale yielding connector prototype tests, conducted in a braced frame configuration, are then presented. The test specimens were subjected to several quasi-static and dynamic load cycles, up to axial brace deformations of 120 mm (3.8% interstory drift). The proposed design limit states were validated through full-scale testing and the performance of a YBS yielding connector brace assembly in a typical braced frame with a bolted brace-to-gusset connection was demonstrated to be very similar to the performance of YBS yielding connectors tested in a purely axial configuration.
dc.publisherAmerican Society of Civil Engineers
dc.titleDesign and Full-Scale Testing of a Cast Steel Yielding Brace System in a Braced Frame
dc.typeJournal Paper
dc.journal.volume143
dc.journal.issue4
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001692
dc.treeJournal of Structural Engineering:;2017:;Volume ( 143 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record