Show simple item record

dc.contributor.authorChang-Soo Kim
dc.contributor.authorHo-Jun Lee
dc.contributor.authorChan-Kyu Park
dc.contributor.authorHyeon-Jong Hwang
dc.contributor.authorHong-Gun Park
dc.date.accessioned2017-12-16T08:58:52Z
dc.date.available2017-12-16T08:58:52Z
dc.date.issued2017
dc.identifier.other%28ASCE%29ST.1943-541X.0001703.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4237062
dc.description.abstractIn the present study, a new fabrication method is proposed for concrete-filled hollow precast concrete columns (HPCC). In the proposed method, corrugated steel plates were used for the internal mold of the hollow core section to improve production efficiency and structural safety. To evaluate the constructability and structural performance, mock-up tests and cyclic loading tests were performed for four HPCC specimens and a conventional RC specimen. The test results showed that the overall behavior of the HPCC specimens was similar to that of the monolithic RC specimen, and the structural performances such as maximum load, initial stiffness, displacement ductility, and energy dissipation were comparable to or even higher than those of the RC specimen. The ultimate strength of the HPCC specimens agreed with the prediction by the current design code, which indicates that the proposed composite columns of precast concrete and cast-in-place concrete showed the full composite strength.
dc.publisherAmerican Society of Civil Engineers
dc.titleCyclic Loading Test for Concrete-Filled Hollow Precast Concrete Columns Produced by Using a New Fabrication Method
dc.typeJournal Paper
dc.journal.volume143
dc.journal.issue4
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001703
dc.treeJournal of Structural Engineering:;2017:;Volume ( 143 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record