Show simple item record

dc.contributor.authorJianguang, Wei
dc.contributor.authorXuesong, Lin
dc.contributor.authorXuemei, Liu
dc.contributor.authorYuanyuan, Ma
dc.date.accessioned2017-11-25T07:21:17Z
dc.date.available2017-11-25T07:21:17Z
dc.date.copyright2017/17/7
dc.date.issued2017
dc.identifier.issn0195-0738
dc.identifier.otherjert_139_06_062901.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4237005
dc.description.abstractThe variable mass flow in perforated horizontal wells is very complex. One reason is that the perforation can increase the roughness of the pipe wall which will increase the frictional pressure drop. The other is the fluid boundary layer and velocity profile of axial flow will be changed due to the “mixing” of the inflow with the axial flow. The influences of the perforation parameters and flux rate on the pressure drawdown in horizontal wellbore are investigated. The perforation parameters include perforation phasing, perforation diameter, and perforation density. According to the experiment results, some modes such as friction factor calculation model (the accuracy of the model is 4%), “mixing” pressure drop calculation model (the accuracy of the model is 3%), and total pressure drop calculation model (the accuracy of the model is 2%) are developed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Experimental and Model Study on Variable Mass Flow for Horizontal Wells With Perforated Completion
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue6
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4037026
dc.journal.fristpage62901
dc.journal.lastpage062901-7
dc.treeJournal of Energy Resources Technology:;2017:;volume( 139 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record