Show simple item record

dc.contributor.authorAl Sam, A.
dc.contributor.authorSzasz, R.
dc.contributor.authorRevstedt, J.
dc.date.accessioned2017-11-25T07:21:16Z
dc.date.available2017-11-25T07:21:16Z
dc.date.copyright2017/16/8
dc.date.issued2017
dc.identifier.issn0195-0738
dc.identifier.otherjert_139_05_051216.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4236991
dc.description.abstractThe dependency of the atmospheric boundary layer (ABL) characteristics on the ABL’s height is investigated by using large eddy simulations (LES). The impacts of ABL’s height on the wind turbine (WT) power production are also investigated by simulating two subsequent wind turbines using the actuator line method (ALM). The results show that, for the same driving pressure forces and aerodynamic roughness height, the wind velocity is higher at deeper ABL, while the wind shear and the wind veer are not affected by the depth. Moreover, the turbulence intensity, kinetic energy, and kinematic shear stress increase with the ABL’s height. Higher power production and power coefficient are obtained from turbines operating at deeper ABL.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Investigation of Wind Farm Power Production for Various Atmospheric Boundary Layer Heights
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue5
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4037311
dc.journal.fristpage51216
dc.journal.lastpage051216-7
dc.treeJournal of Energy Resources Technology:;2017:;volume( 139 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record