Show simple item record

dc.contributor.authorPryor, Owen
dc.contributor.authorBarak, Samuel
dc.contributor.authorLopez, Joseph
dc.contributor.authorNinnemann, Erik
dc.contributor.authorKoroglu, Batikan
dc.contributor.authorNash, Leigh
dc.contributor.authorVasu, Subith
dc.date.accessioned2017-11-25T07:21:13Z
dc.date.available2017-11-25T07:21:13Z
dc.date.copyright2017/30/3
dc.date.issued2017
dc.identifier.issn0195-0738
dc.identifier.otherjert_139_04_042208.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4236963
dc.description.abstractIgnition delay times and methane species time-histories were measured for methane/O2 mixtures in a high CO2 diluted environment using shock tube and laser absorption spectroscopy. The experiments were performed between 1300 K and 2000 K at pressures between 6 and 31 atm. The test mixtures were at an equivalence ratio of 1 with CH4 mole fractions ranging from 3.5% to 5% and up to 85% CO2 with a bath of argon gas as necessary. The ignition delay times and methane time histories were measured using pressure, emission, and laser diagnostics. Predictive ability of two literature kinetic mechanisms (gri 3.0 and aramco mech 1.3) was tested against current data. In general, both mechanisms performed reasonably well against measured ignition delay time data. The methane time-histories showed good agreement with the mechanisms for most of the conditions measured. A correlation for ignition delay time was created taking into account the different parameters showing the ignition activation energy for the fuel to be 49.64 kcal/mol. Through a sensitivity analysis, CO2 is shown to slow the overall reaction rate and increase the ignition delay time. To the best of our knowledge, we present the first shock tube data during ignition of methane/CO2/O2 under these conditions. Current data provides crucial validation data needed for the development of future kinetic mechanisms.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHigh Pressure Shock Tube Ignition Delay Time Measurements During Oxy-Methane Combustion With High Levels of CO2 Dilution
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4036254
dc.journal.fristpage42208
dc.journal.lastpage042208-6
dc.treeJournal of Energy Resources Technology:;2017:;volume( 139 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record