Show simple item record

dc.contributor.authorAmador, German
dc.contributor.authorForero, Jorge Duarte
dc.contributor.authorRincon, Adriana
dc.contributor.authorFontalvo, Armando
dc.contributor.authorBula, Antonio
dc.contributor.authorPadilla, Ricardo Vasquez
dc.contributor.authorOrozco, Wilman
dc.date.accessioned2017-11-25T07:21:13Z
dc.date.available2017-11-25T07:21:13Z
dc.date.copyright2017/16/3
dc.date.issued2017
dc.identifier.issn0195-0738
dc.identifier.otherjert_139_04_042205.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4236959
dc.description.abstractThis paper explores the feasibility of using Syngas with low methane number as fuel for commercial turbocharged internal combustion engines. The effect of methane number (MN), compression ratio (CR), and intake pressure on auto-ignition tendency in spark ignition internal combustion engines was determined. A nondimensional model of the engine was performed by using kinetics mechanisms of 98 chemical species in order to simulate the combustion of the gaseous fuels produced from different thermochemical processes. An error function, which combines the Livengood–Wu with ignition delay time correlation, to estimate the knock occurrence crank angle (KOCA) was proposed. The results showed that the KOCA decreases significantly as the MN increases. Results also showed that Syngas obtained from coal gasification is not a suitable fuel for engines because auto-ignition takes place near the beginning of the combustion phase, but it could be used in internal combustion engines with reactivity controlled compression ignition (RCCI) technology. For the case of high compression ratio and a high inlet pressure at the engine's manifold, fuels with high MN are suitable for the operating conditions proposed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCharacteristics of Auto-Ignition in Internal Combustion Engines Operated With Gaseous Fuels of Variable Methane Number
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4036044
dc.journal.fristpage42205
dc.journal.lastpage042205-8
dc.treeJournal of Energy Resources Technology:;2017:;volume( 139 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record