Show simple item record

dc.contributor.authorForghan, Fariborz
dc.contributor.authorAskari, Omid
dc.contributor.authorNarusawa, Uichiro
dc.contributor.authorMetghalchi, Hameed
dc.date.accessioned2017-11-25T07:21:12Z
dc.date.available2017-11-25T07:21:12Z
dc.date.copyright2017/8/3
dc.date.issued2017
dc.identifier.issn0195-0738
dc.identifier.otherjert_139_04_042004.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4236952
dc.description.abstractTurbine blades are cooled by a jet flow from expanded exit holes (EEH) forming a low-temperature film over the blade surface. Subsequent to our report on the suction-side (low-pressure, high-speed region), computational analyses are performed to examine the cooling effectiveness of the flow from EEH located at the leading edge as well as at the pressure-side (high-pressure, low-speed region). Unlike the case of the suction-side, the flow through EEH on the pressure-side is either subsonic or transonic with a weak shock front. The cooling effectiveness, η (defined as the temperature difference between the hot gas and the blade surface as a fraction of that between the hot gas and the cooling jet), is higher than the suction-side along the surface near the exit of EEH. However, its magnitude declines sharply with an increase in the distance from EEH. Significant effects on the magnitude of η are observed and discussed in detail of (1) the coolant mass flow rate (0.001, 0.002, and 0.004 (kg/s)), (2) EEH configurations at the leading edge (vertical EEH at the stagnation point, 50 deg into the leading-edge suction-side, and 50 deg into the leading-edge pressure-side), (3) EEH configurations in the midregion of the pressure-side (90 deg (perpendicular to the mainstream flow), 30 deg EEH tilt toward upstream, and 30 deg tilt toward downstream), and (4) the inclination angle of EEH.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCooling of Turbine Blades With Expanded Exit Holes: Computational Analyses of Leading Edge and Pressure-Side of a Turbine Blade
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4035829
dc.journal.fristpage42004
dc.journal.lastpage042004-7
dc.treeJournal of Energy Resources Technology:;2017:;volume( 139 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record