Show simple item record

dc.contributor.authorDiaz, German Amador
dc.contributor.authorForero, Jorge Duarte
dc.contributor.authorGarcia, Jesus
dc.contributor.authorRincon, Adriana
dc.contributor.authorFontalvo, Armando
dc.contributor.authorBula, Antonio
dc.contributor.authorPadilla, Ricardo Vasquez
dc.date.accessioned2017-11-25T07:21:11Z
dc.date.available2017-11-25T07:21:11Z
dc.date.copyright2016/16/11
dc.date.issued2017
dc.identifier.issn0195-0738
dc.identifier.otherjert_139_03_032903.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4236935
dc.description.abstractThe application of equilibrium thermodynamics in the study of thermal plant performance under real operating conditions is a constant challenge. In this paper, an analysis of a reservoir pressure piston working between two linear flow resistances is performed by considering the friction of the piston cylinder system on the walls. The proposed model is developed to obtain the optimum power output and speed of the piston in terms of first law efficiency. If the friction on the piston–cylinder assembly is neglected, the expressions obtained are consistent with those presented in the literature under laminar regime. It was also demonstrated that for both laminar and turbulent regimes with overall size constraints, the power delivered can be maximized by balancing the upstream and downstream flow resistances of the piston. This paper also evaluated the influence of the overall size constraints and flow regime on the performance of the piston cylinder. This analysis is equivalent to evaluate the irreversibilities in an endo-irreversible Carnot heat engine with heat loss resistance between the engine and its heat reservoirs. The proposed model introduced some modifications to the results obtained from the recent literature and led to important conclusions. Finally, the proposed model was applied to calculate the lost available work in a turbine operating at steady flow conditions with an ideal gas as working fluid.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMaximum Power From Fluid Flow by Applying the First and Second Laws of Thermodynamics
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4035021
dc.journal.fristpage32903
dc.journal.lastpage032903-8
dc.treeJournal of Energy Resources Technology:;2017:;volume( 139 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record