Show simple item record

dc.contributor.authorRaghib Shakeel, Mohammad
dc.contributor.authorAl-Sadah, Jihad
dc.contributor.authorMokheimer, Esmail M. A.
dc.date.accessioned2017-11-25T07:21:09Z
dc.date.available2017-11-25T07:21:09Z
dc.date.copyright2017/8/2
dc.date.issued2017
dc.identifier.issn0195-0738
dc.identifier.otherjert_139_03_031201.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4236918
dc.description.abstractSolar chimney or Trombe wall has been studied numerically and analytically. Analytical results available in the literature overestimate air flow rate by 46–97%. While insulated walls are used in the experiments, there might still be loss from the chimney walls, which is not usually considered in the available analytical models. It is found that the overestimation of air flow rate can be reduced to 3–14% by including heat losses from the glass and wall side of the chimney in the analytical model. The presently developed numerical model is validated against experimental data from literature. The conditions within which the analytical solution can give good approximate results regarding the air volume flow rate have been identified and discussed. We found that the analytical method simulates solar chimneys well for gap widths of up to 0.3 m and incident radiation above 500 W/m2. The present numerical results revealed that the optimum value of chimney gap width that maximizes the induced flow through the chimney is 0.3 m.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnalytical and Numerical Modeling of Solar Chimney
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4035782
dc.journal.fristpage31201
dc.journal.lastpage031201-11
dc.treeJournal of Energy Resources Technology:;2017:;volume( 139 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record