Show simple item record

dc.contributor.authorAkbari, Babak
dc.contributor.authorMiska, Stefan Z.
dc.date.accessioned2017-11-25T07:21:08Z
dc.date.available2017-11-25T07:21:08Z
dc.date.copyright2016/17/8
dc.date.issued2017
dc.identifier.issn0195-0738
dc.identifier.otherjert_139_02_022904.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4236905
dc.description.abstractA high pressure single polycrystalline diamond compact (PDC) cutter testing facility was used to investigate the effect of five factors on PDC cutter performance on Alabama marble. The factors include: depth of cut (DOC), rotary speed, back rake angle, side rake angle, and confining (wellbore) pressure. The performance is quantified by two parameters: mechanical specific energy (MSE) and friction angle. Fractional factorial design of experiments methodology was used to design the experiments, enabling detection of potential interactions between factors. Results show that, in the range tested, the only statistically significant factor affecting the MSE is DOC. In other words, DOC's influence is predominant and it can mask the effect of all the other factors. These results could have applications in real time pore pressure detection. Further, the results show that back rake angle is the most statistically significant factor in friction angle. Side rake angle and depth of cut also affect the friction angle, but in a relatively unimportant manner. The MSE–DOC behavior is explained and modeled by cutter edge–groove friction and the circular cutter shape. It is speculated that high cutter edge friction overwhelms the actual cutting process. A comparison of five currently present models in the literature with these results is presented and the conclusion is that the future PDC cutter models should digress from the traditional shear failure plane models.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleRelative Significance of Multiple Parameters on the Mechanical Specific Energy and Frictional Responses of Polycrystalline Diamond Compact Cutters
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue2
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4034291
dc.journal.fristpage22904
dc.journal.lastpage022904-7
dc.treeJournal of Energy Resources Technology:;2017:;volume( 139 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record