• Login
    View Item 
    •   DSpace Home
    • ASME
    • Journal of Energy Resources Technology
    • View Item
    •   DSpace Home
    • ASME
    • Journal of Energy Resources Technology
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    The Effects of Inlet Turbulence Intensity and Computational Domain on a Nonpremixed Bluff-Body Flame

    Thumbnail
    View/Open
    jert_139_02_022205.pdf (1.938Mb)
    Date
    2017
    Author
    Chen, Lu
    Battaglia, Francine
    Metadata
    Show full item record
    Abstract
    A bluff body burner was investigated using computational fluid dynamics (CFD) to assess the effects of inlet turbulence intensity and compare the combustion characteristics with and without the bluff-body modeled in the computational domain. The effects of the CFD modeling techniques were assessed for inlet turbulence intensity, using a two-dimensional (2D) versus three-dimensional (3D) computational domain, and whether to include the bluff body in the domain. The simulations were compared with experimental data from the Turbulent Nonpremixed Flames workshop. The results showed that the turbulence intensity specified as a boundary condition at the fuel-jet inlet had a substantial impact on the axial decay of mixture fraction and temperature, which was overlooked by previous researchers when the bluff body was not modeled. The numerical results of the 2D axisymmetric and 3D domains without the bluff body showed that the 3D domain provided the best predictions when the turbulence intensity was defined using a published correlation versus experimental estimates since the k–ε turbulence model underestimated dissipation. It was shown that a 2D axisymmetric domain can be used to obtain predictions with acceptable numerical errors without the inclusion of the bluff body, and that a uniform inlet velocity can be specified, provided that the inlet turbulence intensity is defined using the correlation by Durst et al. (“Methods to Set Up and Investigate Low Reynolds Number, Fully Developed Turbulent Plane Channel Flows,” ASME J. Fluids Eng., 120(3), pp. 496–503.). Finally, further analysis of flow and flame characteristics demonstrated that when the bluff-body was included for the 2D axisymmetric domain, predictions improved and the flow was insensitive to inlet turbulence intensities because the bluff-body provided an entrance region for the flow to develop before mixing, thus reducing inlet effects. Thus, if experimental inlet data are not available, the addition of the bluff-body in the computational domain provides a more accurate jet velocity profile entering the reacting domain and eliminates errors caused by the inlet boundary condition.
    URI
    http://138.201.223.254:8080/yetl1/handle/yetl/4236903
    Collections
    • Journal of Energy Resources Technology

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV