Show simple item record

dc.contributor.authorAdissi, Marcéu O.
dc.contributor.authorLima Filho, Abel C.
dc.contributor.authorGomes, Ruan D.
dc.contributor.authorSilva, Diógenes M. G. B.
dc.contributor.authorBelo, Francisco A.
dc.date.accessioned2017-11-25T07:20:55Z
dc.date.available2017-11-25T07:20:55Z
dc.date.copyright2017/9/8
dc.date.issued2017
dc.identifier.issn0022-0434
dc.identifier.otherds_139_12_124502.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4236759
dc.description.abstractThree-phase induction motors (TIMs) are present in most industrial processes, accounting for more than 60% of the energy consumption in industry. Despite their importance in the productive sector, few motors are properly monitored, mainly due to the high cost of the monitoring equipment and the invasiveness in their installation. This paper presents the implementation and deployment of an industrial wireless sensor network (WSN) to monitor three-phase induction motors. Embedded systems were developed to acquire signals of current and voltage from sensors installed in the motors' terminals, perform local processing to estimate torque and efficiency, and transmit the information through the WSN. The method used to estimate the variables is based on the air-gap torque method. Before the deployment in the industry, experiments were performed to validate the system in laboratory. Finally, the system was employed in a real industrial environment, where different analyses and diagnosis of three motors running were performed. Using the proposed system, the efficiency versus load curves of the motors could be obtained continuously, and an energy loss analysis due to the oversizing of the motors was performed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleImplementation and Deployment of an Intelligent Industrial Wireless System for Induction Motor Monitoring
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue12
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4037167
dc.journal.fristpage124502
dc.journal.lastpage124502-8
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2017:;volume( 139 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record