Show simple item record

dc.contributor.authorYudell, Alexander C.
dc.contributor.authorVan de Ven, James D.
dc.date.accessioned2017-11-25T07:20:55Z
dc.date.available2017-11-25T07:20:55Z
dc.date.copyright2017/10/8
dc.date.issued2017
dc.identifier.issn0022-0434
dc.identifier.otherds_139_12_121007.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4236752
dc.description.abstractSwitched inertance hydraulic systems (SIHS) use inductive, capacitive, and switching elements to boost or “buck” (reduce) a pressure from a source to a load in an ideally lossless manner. Real SIHS circuits suffer a variety of energy losses, with throttling of flow during transitions of the high-speed valve resulting in as much as 44% of overall losses. These throttling energy losses can be mitigated by applying the analog of zero-voltage-switching, a soft switching strategy, adopted from power electronics. In the soft switching circuit, the flow that would otherwise be throttled across the transitioning valve is stored in a capacitive element and bypassed through check valves in parallel with the switching valves. To evaluate the effectiveness of soft switching in a boost converter SIHS, a lumped parameter model was constructed. Simulation demonstrates that soft switching improves the efficiency of the modeled circuit by 42% at peak load power and extends the power delivery capabilities by 77%.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSoft Switching in Switched Inertance Hydraulic Circuits
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue12
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4036887
dc.journal.fristpage121007
dc.journal.lastpage121007-9
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2017:;volume( 139 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record