Show simple item record

dc.contributor.authorWarrender, Jeffrey M.
dc.contributor.authorVigilante, Gregory N.
dc.date.accessioned2017-11-25T07:19:06Z
dc.date.available2017-11-25T07:19:06Z
dc.date.copyright2017/3/2
dc.date.issued2017
dc.identifier.issn0094-9930
dc.identifier.otherpvt_139_03_031404.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4235592
dc.description.abstractFour-point bend tests were performed on Cr-coated steel specimens that were pulsed laser heated (PLH) with two pulses per area from a millisecond pulse duration laser. Cracks were observed in the PLH specimens extending to the substrate. Specimens subjected to PLH exhibited reduced cycles to failure under all the loadings. This indicates that the PLH process replaces the crack initiation process, and the PLH-formed cracks give the expected crack propagation behavior. This approach provides a method to separately study the effects of crack formation and crack propagation in fatigue life tests. It is especially applicable to situations in which the cracks to be propagated are induced by thermomechanical processes.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleReduction in Fatigue Life in Cr-Coated Steel Induced by Pulsed Laser Heating
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4035789
dc.journal.fristpage31404
dc.journal.lastpage031404-4
dc.treeJournal of Pressure Vessel Technology:;2017:;volume( 139 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record