Show simple item record

dc.contributor.authorJiang, Wenchun
dc.contributor.authorWoo, Wanchuck
dc.contributor.authorWan, Yu
dc.contributor.authorLuo, Yun
dc.contributor.authorXie, Xuefang
dc.contributor.authorTu, S. T.
dc.date.accessioned2017-11-25T07:19:06Z
dc.date.available2017-11-25T07:19:06Z
dc.date.copyright2016/11/10
dc.date.issued2017
dc.identifier.issn0094-9930
dc.identifier.otherpvt_139_03_031401.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4235589
dc.description.abstractThrough-thickness distributions of the welding residual stresses were studied in the range of 50–100 mm thick plates by using finite-element modeling (FEM) and neutron diffraction measurements. In order to simulate the residual stresses through the thickness of the thick weld joints, this paper proposes a two-dimensional generalized plane strain (GPS) finite-element model coupled with the mixed work hardening model. The residual stress distributions show mostly asymmetric parabola profiles through the thickness of the welds and it is in good correlation with the neutron diffraction results. Both the heat input and plate thickness have little influence on the residual stress distributions due to the relatively large constraints of the thick specimen applied for each welding pass. A general formula has been suggested to evaluate the distributions of the through-thickness residual stresses in thick welds based on FEM and neutron diffraction experimental results.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEvaluation of Through-Thickness Residual Stresses by Neutron Diffraction and Finite-Element Method in Thick Weld Plates
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4034676
dc.journal.fristpage31401
dc.journal.lastpage031401-10
dc.treeJournal of Pressure Vessel Technology:;2017:;volume( 139 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record