Show simple item record

dc.contributor.authorOrynyak, Igor
dc.contributor.authorZarazovskii, Maksym
dc.contributor.authorBorodii, Mykhaylo
dc.date.accessioned2017-11-25T07:19:05Z
dc.date.available2017-11-25T07:19:05Z
dc.date.copyright2017/3/2
dc.date.issued2017
dc.identifier.issn0094-9930
dc.identifier.otherpvt_139_03_031208.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4235579
dc.description.abstractA physically and statistically based method for steam generator (SG) heat exchanger tubes (HET) integrity assessment is proposed. The method based is on the stochastic laws of crack dimensions distribution with taking into account its growth, limit load-model of cracked tube, and SG plugging statistics. Based on the history of the tubes, plugging of the specific SG three statistical parameters has to be found: initial number of defects, stochastic parameter of defect depth, and the defect growth rate. The developed method was used for the prediction of HET failure for all Ukrainian SG. It is also used for the justification of pressure reduction of hydrostatic test (HT) for primary circuit of WWER NPPs. It is shown that the pressure reduction from 24.5 to 19.6 MPa for WWER-1000 s and from 19.1 to 15.7 MPa for the WWER-440 s does not practically increase the HET failure probability during operation.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA New Methodology for Structural Reliability Assessment of the Heat Exchanger Tubes of WWER Steam Generators
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4035414
dc.journal.fristpage31208
dc.journal.lastpage031208-9
dc.treeJournal of Pressure Vessel Technology:;2017:;volume( 139 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record