Show simple item record

dc.contributor.authorChandra Mondal, Bipul
dc.contributor.authorSutra Dhar, Ashutosh
dc.date.accessioned2017-11-25T07:19:04Z
dc.date.available2017-11-25T07:19:04Z
dc.date.copyright2016/28/9
dc.date.issued2017
dc.identifier.issn0094-9930
dc.identifier.otherpvt_139_02_021702.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4235567
dc.description.abstractCodes/standards have been developed to calculate accurately the burst pressure for corroded pipelines. Five burst pressure models are evaluated in this paper using three-dimensional finite-element (FE) analysis. The finite-element models are validated using burst test results available in the literature. The design codes/standards are found to calculate variable burst pressures with respect to the finite-element calculations and the laboratory test results. The variability in the calculated burst pressures is attributed to the use of different flow stresses for the material and different burst pressure reduction factors for the corroded geometry. The Folias factor is considered as the major parameter contributing to the burst pressure reduction factor. Three different equations are currently used to calculate the Folias factor in the design codes that are expressed in terms of l2/(Dt). However, the finite-element evaluation presented here reveals that the Folias factor also depends on other parameters such as the defect depth.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFinite-Element Evaluation of Burst Pressure Models for Corroded Pipelines
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4034408
dc.journal.fristpage21702
dc.journal.lastpage021702-8
dc.treeJournal of Pressure Vessel Technology:;2017:;volume( 139 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record