Show simple item record

dc.contributor.authorZhang, Yi
dc.contributor.authorBen Jar, P.-Y.
dc.date.accessioned2017-11-25T07:19:03Z
dc.date.available2017-11-25T07:19:03Z
dc.date.copyright2016/27/9
dc.date.issued2017
dc.identifier.issn0094-9930
dc.identifier.otherpvt_139_02_021402.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4235558
dc.description.abstractQuasi-static stress–strain relationship of polyethylene (PE) pressure pipe that plays an important role on its long-term performance has been established by removing the viscous stress component from the experimentally measured total stress. Work reported here is focused on the influence of crosshead speed on the notched pipe ring (NPR) specimens that are prepared from PE pressure pipe of 2 in. in diameter. Viscous component of the stress–strain relationship was determined using a spring–damper–plastic element model, calibrated using results from stress relaxation tests. Crosshead speeds considered for the initial stretch of the stress relaxation tests are 0.01, 1, and 10 mm/min which due to the relatively uniform deformation in the gauge section generate the same order of difference in the strain rates. Results from the study suggest that the quasi-static stress–strain relationship is affected by the crosshead speed used to generate the deformation, and the trend of change is opposite to the total stress counterpart that includes the viscous component.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffects of Crosshead Speed on the Quasi-Static Stress–Strain Relationship of Polyethylene Pipes
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4033777
dc.journal.fristpage21402
dc.journal.lastpage021402-6
dc.treeJournal of Pressure Vessel Technology:;2017:;volume( 139 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record