Show simple item record

dc.contributor.authorWang, Wenyuan
dc.contributor.authorTang, Guolei
dc.contributor.authorSong, Xiangqun
dc.contributor.authorZhou, Yong
dc.date.accessioned2017-11-25T07:19:03Z
dc.date.available2017-11-25T07:19:03Z
dc.date.copyright2016/27/9
dc.date.issued2017
dc.identifier.issn0094-9930
dc.identifier.otherpvt_139_02_021302.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4235556
dc.description.abstractThe transient sloshing in laterally excited horizontal elliptical containers with T-shaped baffles is first investigated by using a novel semi-analytical scaled boundary finite-element method (SBFEM). The proposed method combines the advantages of the finite-element and the boundary element methods (BEMs) with unique properties of its own, in which a new coordinate system including the circumferential local coordinate and the radial coordinate has been established. Only the boundary of the computational domain needs to be discretized in the circumferential direction as the same as the BEM and the solution in the radial direction is analytical. Assuming ideal, irrotational flow and small-amplitude free-surface elevation, the formulations (using a new variational principle formulation) and solutions of SBFEM equations for an eigenvalue problem under zero external excitation (free sloshing problem) are derived in detail. Subsequently, based on an appropriate decomposition of the container-fluid motion, and considering the eigenvalues and eigenmodes of the above eigenvalue problem, an efficient methodology is proposed for externally induced sloshing through the calculation of the corresponding sloshing masses and liquid motion. Several numerical examples are presented to demonstrate the simplicity, versatility, and applicability of the SBFEM during the simulation of sloshing problems of complex containers, and excellent agreement with the other methods is observed. Meanwhile, three T-shaped baffle configurations are considered including surface-piercing baffle, bottom-mounted baffle and their combination form, and Y-shaped configuration evolved from that of T-shaped baffle has been taken into consideration as well. The liquid fill level, arrangement and length of those baffles affecting the sloshing masses, and liquid motion are investigated in detail. The results also show that the present method can easily solve the singularity problems analytically by choosing the scaling center at the tip of the baffles and allows for the simulation of complex sloshing phenomena using far less number of degrees-of-freedom.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTransient Sloshing in Partially Filled Laterally Excited Horizontal Elliptical Vessels With T-Shaped Baffles
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4034148
dc.journal.fristpage21302
dc.journal.lastpage021302-13
dc.treeJournal of Pressure Vessel Technology:;2017:;volume( 139 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record