Show simple item record

dc.contributor.authorMiura, Naoki
dc.contributor.authorMomoi, Yasunori
dc.contributor.authorYamamoto, Masato
dc.date.accessioned2017-11-25T07:19:02Z
dc.date.available2017-11-25T07:19:02Z
dc.date.copyright2016/28/9
dc.date.issued2017
dc.identifier.issn0094-9930
dc.identifier.otherpvt_139_02_021207.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4235545
dc.description.abstractThe Master Curve approach using miniature C(T) specimens with 4 mm thickness is promising for directly determining the reference temperature of reactor pressure vessel (RPV) steels because they can be taken from the broken halves of the Charpy specimens used in the surveillance program to monitor neutron irradiation embrittlement. The relative dimensional tolerances of standard C(T) specimens are provided in the present ASTM E1921 standard; consequently, the absolute dimensional tolerances are stricter for smaller specimens. In this study, the effect of the tolerances of key dimensions on the elastic–plastic equivalent stress intensity factor derived from the J-integral, KJ, was calculated using three-dimensional finite-element analysis. Even if the dimensional tolerances for the miniature C(T) specimens based on the present standard were mitigated in some degree (as examples, the tolerance of specimen thickness of ±0.08 mm was mitigated to ±0.1 mm; and the tolerance of specimen width of ±0.04 mm was mitigated to ±0.1 mm), the variations of KJ and the reference temperature were negligibly small. Furthermore, the use of the mitigated dimensional tolerances with adequate accuracy for evaluating the fracture toughness was ascertained.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStudy on Dimensional Tolerances Required for Miniature C(T) Specimens
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4034583
dc.journal.fristpage21207
dc.journal.lastpage021207-8
dc.treeJournal of Pressure Vessel Technology:;2017:;volume( 139 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record