Show simple item record

dc.contributor.authorLi, Yinsheng
dc.contributor.authorHasegawa, Kunio
dc.contributor.authorUdagawa, Makoto
dc.date.accessioned2017-11-25T07:19:02Z
dc.date.available2017-11-25T07:19:02Z
dc.date.copyright2016/27/9
dc.date.issued2017
dc.identifier.issn0094-9930
dc.identifier.otherpvt_139_02_021202.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4235539
dc.description.abstractThe stress intensity factors (SIFs) for pipes containing semi-elliptical surface cracks with large aspect ratios were calculated by finite-element analysis (FEA). The cracks were circumferential and axial surface cracks inside the pipes. The parameters of the SIFs are crack aspect ratio, crack depth, and the ratio of pipe radius to wall thickness. In comparing SIFs for plates and pipes, it can be clarified that SIFs for both plates and thin pipes with t/Ri ≤ 1/10 are almost the same, and the SIFs for plates can be used as a substitute for pipes with t/Ri ≤ 1/10, where t is the pipe wall thickness, and Ri is the inner radius of the pipe. This means that it is not necessary to provide SIF solutions for pipes with t/Ri ≤ 1/10, and it is suggested that the number of tables for influence coefficient values for pipes can be significantly reduced.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDevelopment of Stress Intensity Factors for Cracks With Large Aspect Ratios in Pipes and Plates
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4034286
dc.journal.fristpage21202
dc.journal.lastpage021202-13
dc.treeJournal of Pressure Vessel Technology:;2017:;volume( 139 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record