Show simple item record

dc.contributor.authorBouzid, Abdel-Hakim
dc.contributor.authorKazeminia, Mehdi
dc.date.accessioned2017-11-25T07:19:00Z
dc.date.available2017-11-25T07:19:00Z
dc.date.copyright2016/07/22
dc.date.issued2016
dc.identifier.issn0094-9930
dc.identifier.otherpvt_138_06_061402.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4235516
dc.description.abstractThe analytical prediction of the contact stress in tube-to-tubesheet joints subjected to hydraulic expansion is conducted without any consideration to reverse yielding that can occur inside the tube. Most existing models consider the tube and tubesheet to unload elastically when the expansion pressure is released. These models are therefore less conservative as they overestimate the contact pressure. An analytical model that considers strain-hardening material behavior of the tube and tubesheet and accounts for reverse yielding has been developed. The model is based on Henckey deformation theory and the Von Mises yield criteria. The paper shows that reverse yielding that is present in tubes during hydraulic expansion unloading makes the joint less rigid and causes a decrease in the contact pressure depending on the gap clearance and the materials used. A good correlation between the analytical and finite elements results is obtained on different treated cases which gives confidence on the developed model.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffect of Reverse Yielding on the Residual Contact Pressure in Tube-to-Tubesheet Joints
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue6
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4033934
dc.journal.fristpage61402
dc.journal.lastpage061402-9
dc.treeJournal of Pressure Vessel Technology:;2016:;volume( 138 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record