Show simple item record

dc.contributor.authorYan, Yan
dc.contributor.authorJixian, Dong
dc.contributor.authorWei, Tang
dc.contributor.authorShiyu, Feng
dc.date.accessioned2017-11-25T07:17:12Z
dc.date.available2017-11-25T07:17:12Z
dc.date.copyright2017/14/2
dc.date.issued2017
dc.identifier.issn0022-1481
dc.identifier.otherht_139_05_054503.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4234435
dc.description.abstractThe phenomenon of steam condensation occurring on one surface in a rectangular horizontal channel was experimentally studied. The experiment was conducted using a visualization method with a steam quality of 0.1–0.9 and mass flux of 20–50 kg/m2 s. Four flow patterns (annular, wave, slug, and plug) were observed, and the effects of quality and mass flux on the condensing heat transfer were analyzed. The mass flux and steam quality primarily affect the condensing heat transfer coefficient in the shear-dominated flow regime. The condensing heat transfer coefficients are nearly constant only in a certain range of steam quality. This result is disparate from what has been reported in previous literatures. It was also observed that the condensing heat transfer coefficient rises with an increase in the quality. Two flow regime maps were employed to predict the flow regimes observed in this study. The result reveals that the Tandon flow regime map agrees quite well with the experimental results.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleVisualization Study of Steam Condensation in Rectangular Channel of Multichannel Cylinder Dryer
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue5
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4035590
dc.journal.fristpage54503
dc.journal.lastpage054503-5
dc.treeJournal of Heat Transfer:;2017:;volume( 139 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record