Show simple item record

dc.contributor.authorKitano, Tomoaki
dc.contributor.authorIida, Hiroaki
dc.contributor.authorKurose, Ryoichi
dc.date.accessioned2017-11-25T07:17:06Z
dc.date.available2017-11-25T07:17:06Z
dc.date.copyright2017/10/1
dc.date.issued2017
dc.identifier.issn0022-1481
dc.identifier.otherht_139_04_044501.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4234404
dc.description.abstractThe effect of chemical reactions of burnt gas on heat transfer on a cooled wall in a turbulent channel flow is investigated by direct numerical simulations. Burnt gas from a H2/O2 mixture is used as a fluid and a detailed chemical reaction mechanism that considers eight chemical species and 19 elemental reactions is used in the reaction calculation. The initial gas temperature and pressure are 3173 K and 2.0 MPa, respectively. The Reynolds number based on the channel width and mean streamwise velocity is approximately 6400 and that based on the channel half width and friction velocity is approximately 200. The results show that heat release because of consumption of radicals such as OH and H near the wall increases the heat flux on the wall and that the heat flux is enhanced by the significant increase in the local heat flux at high-speed streaks where radicals are supplied by sweep events constituting bursting motions in the turbulent boundary layer.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffect of Chemical Reactions of H2/O2 Combustion Gas on Wall Heat Flux in a Turbulent Channel Flow
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue4
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4035173
dc.journal.fristpage44501
dc.journal.lastpage044501-5
dc.treeJournal of Heat Transfer:;2017:;volume( 139 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record