Show simple item record

dc.contributor.authorChen, Guansheng
dc.contributor.authorLi, Nanshuo
dc.contributor.authorXiang, Huanhuan
dc.contributor.authorLi, Fan
dc.date.accessioned2017-11-25T07:17:06Z
dc.date.available2017-11-25T07:17:06Z
dc.date.copyright2017/10/1
dc.date.issued2017
dc.identifier.issn0022-1481
dc.identifier.otherht_139_04_042901.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4234403
dc.description.abstractIt is well known that attaching fins on the tubes surfaces can enhance the heat transfer into and out from the phase change materials (PCMs). This paper presents the results of an experimental study on the thermal characteristics of finned coil latent heat storage unit (LHSU) using paraffin as the phase change material (PCM). The paraffin LHSU is a rectangular cube consists of continuous horizontal multibended tubes attached vertical fins at the pitches of 2.5, 5.0, and 7.5 mm that creates the heat transfer surface. The shell side along with the space around the tubes and fins is filled with the material RT54 allocated to store energy of water, which flows inside the tubes as heat transfer fluid (HTF). The measurement is carried out under four different water flow rates: 1.01, 1.30, 1.50, and 1.70 L/min in the charging and discharging process, respectively. The temperature of paraffin and water, charging and discharging wattage, and heat transfer coefficient are plotted in relation to the working time and water flow rate.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental Study on Thermal Characteristics of Finned Coil LHSU Using Paraffin as Phase Change Material
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue4
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4035321
dc.journal.fristpage42901
dc.journal.lastpage042901-7
dc.treeJournal of Heat Transfer:;2017:;volume( 139 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record