Show simple item record

dc.contributor.authorDorao, Carlos A.
dc.contributor.authorFernandez, Oscar Blanco
dc.contributor.authorFernandino, Maria
dc.date.accessioned2017-11-25T07:17:02Z
dc.date.available2017-11-25T07:17:02Z
dc.date.copyright2017/25/7
dc.date.issued2017
dc.identifier.issn0022-1481
dc.identifier.otherht_139_11_111510.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4234364
dc.description.abstractIn spite of the extensive work in flow boiling in small-diameter tubes, the general characteristics and dominant mechanisms remain elusive. In this study, flow boiling heat transfer of R134a inside a 5 mm I.D., smooth horizontal stainless steel pipe is experimentally studied. Local heat transfer coefficients (HTCs) were measured for heat fluxes from 3.9 to 47 kW/m2 and mass fluxes from 200 to 400 kg/m2 s at a saturation temperature of 18.6 °C. The studied cases have shown different behaviors at low and high heat fluxes. At low heat fluxes, the convective contribution looks to control the HTC, while at high heat fluxes the nucleation of vapor looks to be the dominant mechanism. Reducing the heat flux, the HTC approaches asymptotically a limit equivalent to the single-phase HTC defined in terms of the sum of the superficial liquid and vapor Reynolds numbers. A new correlation for dominant convective flow boiling is proposed and evaluated against experimental data from the literature.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental Study of Horizontal Flow Boiling Heat Transfer of R134a at a Saturation Temperature of 18.6 °C
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue11
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4037153
dc.journal.fristpage111510
dc.journal.lastpage111510-11
dc.treeJournal of Heat Transfer:;2017:;volume( 139 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record