Show simple item record

dc.contributor.authorBigham, Sajjad
dc.contributor.authorMoghaddam, Saeed
dc.date.accessioned2017-11-25T07:17:01Z
dc.date.available2017-11-25T07:17:01Z
dc.date.copyright2017/21/6
dc.date.issued2017
dc.identifier.issn0022-1481
dc.identifier.otherht_139_11_111503.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4234356
dc.description.abstractIn this study, six benchmark experiments are conducted on bubbles at different growth stages to evaluate the assumptions of the existing microchannel flow boiling heat transfer models/hypothesis. The results show that the bubble ebullition process triggers a spike in the local surface heat flux due to the thin film evaporation and transient conduction heat transfer mechanisms. This enhancement in the surface heat flux is limited to a very small area at the bubble–surface contact region at the nucleation site limiting the overall heat transfer contribution of the bubble ebullition process. The contribution of these two mechanisms of heat transfer increases as the bubble–surface contact area becomes larger. As the bubbles length increases, the time period of activation of the microlayer evaporation mechanism substantially increases while that of the transient conduction mechanism remains relatively unchanged. When the microchannel is mostly occupied by bubbles, the thin film evaporation mechanism becomes the dominant heat transfer mode. The results clearly indicate that single-phase heat transfer mechanism active at surface regions not covered by bubbles is governed by the laminar flow theory (for the test conditions presented here). In essence, a measureable enhancement effect in the liquid phase due to bubbles growth and flow has not been observed. A comparison with the existing microchannel flow boiling models suggests that the three-zone flow boiling model can qualitatively describe the heat transfer events observed in this experiment but fails to accurately predict the magnitude of the heat transfer mechanisms.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePhysics of the Microchannel Flow Boiling Process and Comparison With the Existing Theories
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue11
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4036655
dc.journal.fristpage111503
dc.journal.lastpage111503-10
dc.treeJournal of Heat Transfer:;2017:;volume( 139 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record