Show simple item record

dc.contributor.authorVahaji, Sara
dc.contributor.authorChi Pok Cheung, Sherman
dc.contributor.authorHeng Yeoh, Guan
dc.contributor.authorTu, Jiyuan
dc.date.accessioned2017-11-25T07:16:54Z
dc.date.available2017-11-25T07:16:54Z
dc.date.copyright2017/15/3
dc.date.issued2017
dc.identifier.issn0022-1481
dc.identifier.otherht_139_07_074501.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4234278
dc.description.abstractModeling subcooled boiling flows in vertical channels has relied heavily on the utilization of empirical correlations for the active nucleation site density, bubble departure diameter, and bubble departure frequency. Following the development and application of mechanistic modeling at low pressures, the capability of the model to resolve flow conditions at elevated pressure up to 10 bar is thoroughly assessed and compared with selected empirical models. Predictions of the mechanistic and selected empirical models are validated against two experimental data at low to elevated pressures. The results demonstrate that the mechanistic model is capable of predicting the heat and mass transfer processes. In spite of some drawbacks of the currently adopted force balance model, the results still point to the great potential of the mechanistic model to predict a wide range of flow conditions in subcooled boiling flows.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInvestigation of the Influence of Elevated Pressure on Subcooled Boiling Flow—Model Evaluation Toward Generic Approach
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue7
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4035805
dc.journal.fristpage74501
dc.journal.lastpage074501-10
dc.treeJournal of Heat Transfer:;2017:;volume( 139 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record