Show simple item record

dc.contributor.authorZhang, Yongjiang
dc.contributor.authorZhong, Fengquan
dc.contributor.authorXing, Yunfei
dc.contributor.authorZhang, Xinyu
dc.date.accessioned2017-11-25T07:16:52Z
dc.date.available2017-11-25T07:16:52Z
dc.date.copyright2017/28/2
dc.date.issued2017
dc.identifier.issn0022-1481
dc.identifier.otherht_139_06_064501.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4234258
dc.description.abstractIn this paper, characteristics of turbulent flow and convective heat transfer of supercritical China RP-3 kerosene in a horizontal straight circular tube are studied experimentally, and the validity of Chilton–Colburn analogy is examined. Using a three-stage heating system, experiments are conducted at a fuel temperature range of 650–800 K, a pressure range of 3–4 MPa, and a Reynolds number range of 1 × 105–3.5 × 105. The Nusselt number and skin friction coefficient are calculated through control volume analysis proposed in this paper. Heat transfer enhancement and deterioration were observed in the experiments as well as the similar change of skin friction coefficient. The present results show that Chilton–Colburn analogy is also valid for turbulent flow and heat transfer of supercritical kerosene in horizontal straight circular tubes.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Experimental Study of Chilton–Colburn Analogy Between Turbulent Flow and Convective Heat Transfer of Supercritical Kerosene
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue6
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4035708
dc.journal.fristpage64501
dc.journal.lastpage064501-6
dc.treeJournal of Heat Transfer:;2017:;volume( 139 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record