Show simple item record

dc.contributor.authorRemella, Karthik S.
dc.contributor.authorGerner, Frank M.
dc.contributor.authorShuja, Ahmed
dc.date.accessioned2017-11-25T07:16:52Z
dc.date.available2017-11-25T07:16:52Z
dc.date.copyright2017/28/2
dc.date.issued2017
dc.identifier.issn0022-1481
dc.identifier.otherht_139_06_062901.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4234257
dc.description.abstractThe paper introduces a novel two-phase heat transfer device (TPHTD) which is employed in the thermal management of light emitting diodes (LEDs). The heat transfer device structurally resembles a conventional loop heat pipe (LHP) without a compensation chamber, but operates very differently from it. The device is comprised of a central evaporator package and a circular coil that acts as a heat exchanger loop. The working fluid leaving the evaporator has a two-phase mixture quality of approximately 0.2. Having introduced the device, the paper delineates a mathematical model for predicting its thermal performance. The primary objective of the model is to provide a fundamental understanding of the operation of the device. A one-dimensional thermal resistance model (TRM) is utilized in modeling the evaporator. The paper presents a detailed discussion on obtaining these resistances from experiments conducted on the device. A correlation for the external heat transfer coefficient of the heat exchanger loop is proposed based on experiments and is found to be in good agreement with literature. The model predicts performance parameters such as board temperature, two-phase mixture quality, and saturation and subcooled temperatures (Tsat and Tsc) of the working fluid for different input thermal powers (Qtot). Based on experimental evidence, it is concluded that the majority of Qtot (∼75%) is utilized in phase change of the working fluid, and the rest reheats the working fluid from a lower subcooled temperature (Tsc) to the saturation temperature (Tsat) of the evaporator.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMathematical Modeling of Novel Two-Phase Heat Transfer Device for Thermal Management of Light Emitting Diodes
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue6
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4035649
dc.journal.fristpage62901
dc.journal.lastpage062901-13
dc.treeJournal of Heat Transfer:;2017:;volume( 139 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record