Show simple item record

dc.contributor.authorMazor, Gedalya
dc.contributor.authorLadizhensky, Izhak
dc.contributor.authorNemirovsky, Dmitry
dc.contributor.authorAlfi, Alon
dc.contributor.authorRabin, Andrei
dc.contributor.authorYehud, Elad
dc.contributor.authorKorin, Eli
dc.date.accessioned2017-11-25T07:16:45Z
dc.date.available2017-11-25T07:16:45Z
dc.date.copyright2016/8/11
dc.date.issued2017
dc.identifier.issn0022-1481
dc.identifier.otherht_139_02_022901.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4234176
dc.description.abstractThe possibility of using a frost layer, created on the surface of a sample that undergoes cryogenic treatment, as a heat transfer enhancer was recently studied. This layer grows on the preliminary cooled sample surface as a result of its contact with moist air flow prior to its immersion into liquid nitrogen. A significant increase in the outflow heat flux (up to 12.8 times), or, alternatively, a cooling time shortening, in comparison with the bare sample was found. A detailed description of the frost layer development along with the influence of the thickness of the layer on the efficiency of the cooling process, as well as environmental parameters that affect the thickness itself is presented in the paper.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAccelerated Cryogenic Cooling Caused by the Temporary Frost Layer Enhancer
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue2
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4034899
dc.journal.fristpage22901
dc.journal.lastpage022901-7
dc.treeJournal of Heat Transfer:;2017:;volume( 139 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record