• Login
    View Item 
    •   DSpace Home
    • ASME
    • Journal of Heat Transfer
    • View Item
    •   DSpace Home
    • ASME
    • Journal of Heat Transfer
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Orientation Effects on Pool Boling of Microporous Coating in Water

    Thumbnail
    View/Open
    ht_139_02_020906.pdf (664.2Kb)
    Date
    2017
    Author
    Jun, Seongchul
    Kim, Jinsub
    Kim, Hwan Yeol
    You, Seung M.
    Metadata
    Show full item record
    Abstract
    Copper HTCMC (High-temperature, Thermally Conductive Microporous Coating) with a coating thickness of ~300 µm was created by sintering 67 µm copper particles onto a flat copper surface. This was shown to be the optimum particle size and thickness combination, in terms of boiling heat transfer enhancement with water, during a prior pool boiling study conducted by Jun et al. [1]. The effects of orientation of pool boiling heat transfer in saturated distilled water at 1 atm were tested experimentally and compared with a plain copper surface. An SEM image (top left) shows the porous structure of HTCMC demonstrating reentrant cavities which promote nucleate boiling and lead to significant critical heat flux (CHF) enhancement compared to the plain copper surface (top right). The nucleate boiling incipience heat flux of HTCMC was demonstrated to be 5 kW/m2, which was an 8x reduction when compared to a plain copper surface which was found to have an incipience heat flux of 40 kW/m2. At this same 40 kW/m2 heat flux, the activated nucleation site density of HTCMC was extremely high, and each bubble appeared much smaller compared to a plain surface. This can be seen in the first row of images, captured with a high speed camera at 2,000 fps. The bubble growth times and departing bubble sizes of 0° and 90° are comparable for both HTCMC and plain surfaces with the order of 10 milliseconds and 100 micrometers. However, when oriented at 180°, the bubble growth time was the order of 100 milliseconds for both HTCMC and plain surface, and the departing bubble size was the order of 10 millimeters. This is due to the growth of a large bubble which coalesced with adjacent bubbles to become a relatively huge bubble which was stretched by buoyance forces before the bubble departed.
    URI
    http://138.201.223.254:8080/yetl1/handle/yetl/4234149
    Collections
    • Journal of Heat Transfer

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV