Show simple item record

dc.contributor.authorLi, Wei
dc.contributor.authorChen, Xu
dc.contributor.authorChen, Jing-Xiang
dc.contributor.authorSun, Zhi-Chuan
dc.contributor.authorSimon, Terrence W.
dc.date.accessioned2017-11-25T07:16:40Z
dc.date.available2017-11-25T07:16:40Z
dc.date.copyright2016/13/9
dc.date.issued2017
dc.identifier.issn0022-1481
dc.identifier.otherht_139_01_011501.pdf
dc.identifier.urihttp://138.201.223.254:8080/yetl1/handle/yetl/4234122
dc.description.abstractAn investigation of refrigerant R410A condensation on a shell and tube heat exchanger simulation is conducted. Tests are on the outside of a horizontal smooth tube, a herringbone tube, and a newly developed three-dimensional-enhanced tube, called the enhanced tube (EHT) tube, all of the same outer diameter. Experiments were conducted at a constant saturation temperature of 45 °C, a constant inlet vapor quality of 0.8, a constant outlet vapor quality of 0.1, and mass fluxes ranging from 5 kg/(m2 s) to 50 kg/(m2 s). At low-mass velocities, the smooth tube shows superior performance over the herringbone tube and the EHT tube. The cause might lie in surface tension effects that result in liquid inundation at the lower portion of the tube, thickening the film on the tube and deteriorating the heat transfer performance. Analyses were conducted to find a suitable correlation of the experimental data.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleShell-Side Flow Condensation of R410A on Horizontal Tubes at Low-Mass Fluxes
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue1
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4034552
dc.journal.fristpage11501
dc.journal.lastpage011501-9
dc.treeJournal of Heat Transfer:;2017:;volume( 139 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record