Show simple item record

dc.contributor.authorAndrew B. Kennedy
dc.contributor.authorYang Zhang
dc.contributor.authorKevin A. Haas
dc.date.accessioned2017-05-08T21:10:49Z
dc.date.available2017-05-08T21:10:49Z
dc.date.copyrightJanuary 2008
dc.date.issued2008
dc.identifier.other%28asce%290733-950x%282008%29134%3A1%2861%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/41719
dc.description.abstractThe behavior of rip currents with changing bar and gap lengths was tested in a series of laboratory experiments using video-tracked floating drifters. Qualitatively, currents showed strong differences in overall character with changing topography. As narrow gaps became wider, the circulation tended to first travel parallel to the shoreline instead of immediately offshore, although strong offshore-directed flows were found for all topographies. Quantitatively, the width of the rip neck was found to increase slowly when compared to the increasing width of the rip channel. Maximum offshore and longshore velocities showed little dependence on bar or gap lengths, and were found to scale well with the predicted rate of generation of circulation. Finally, volumetric offshore flow rates through the rip channel showed no proportionality with the bar length as predicted by the mass transport hypothesis of rip current strength.
dc.publisherAmerican Society of Civil Engineers
dc.titleRip Currents with Varying Gap Widths
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue1
dc.journal.titleJournal of Waterway, Port, Coastal, and Ocean Engineering
dc.identifier.doi10.1061/(ASCE)0733-950X(2008)134:1(61)
dc.treeJournal of Waterway, Port, Coastal, and Ocean Engineering:;2008:;Volume ( 134 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record