Show simple item record

dc.contributor.authorR. Sandven
dc.contributor.authorE. Husby
dc.contributor.authorJ. E. Husby
dc.contributor.authorJ. Jønland
dc.contributor.authorK. O. Roksvåg
dc.contributor.authorF. Stæhli
dc.contributor.authorR. Tellugen
dc.date.accessioned2017-05-08T21:10:44Z
dc.date.available2017-05-08T21:10:44Z
dc.date.copyrightJanuary 2007
dc.date.issued2007
dc.identifier.other%28asce%290733-950x%282007%29133%3A1%283%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/41661
dc.description.abstractThe problem of wave-induced liquefaction is an important feature in coastal and marine engineering, and is one of the main research topics in the European Union project Liquefaction around Marine Structures (LIMAS). In this context, the gas content of a soil is one topic of interest, as the presence of gas influences the pore pressure response and the gradient distribution in the seabed during wave action. The main objective of the work described herein has been to develop a new sampler that enables in situ measurement of gas content in the seabed, and at the same time retrieves a representative sample of the soil. The sampler should be able to maintain the natural soil structure and amount of gas in the pores to a high degree, and should primarily be used in sandy and silty materials. The major challenge in the project was to achieve perfect sealing of the sample container after sample shearing. This was finally obtained by use of a ball valve and backpressurized ball-valve housing in the lower end of the sample container, and a piston in the upper end. The main problem with the ball-valve concept was wear and clogging from sand particles inside the ball valve, and various sampler designs were tested and evaluated before the final, robust design was chosen. The gas content in the soil is determined in situ, using backpressure for compression of the gas in the sample container, enabling deaired water to be injected in the sample. This water volume is recorded on a burette and is used to determine the total amount of gas in the sample. To obtain the degree of saturation
dc.publisherAmerican Society of Civil Engineers
dc.titleDevelopment of a Sampler for Measurement of Gas Content in Soils
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue1
dc.journal.titleJournal of Waterway, Port, Coastal, and Ocean Engineering
dc.identifier.doi10.1061/(ASCE)0733-950X(2007)133:1(3)
dc.treeJournal of Waterway, Port, Coastal, and Ocean Engineering:;2007:;Volume ( 133 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record