Show simple item record

dc.contributor.authorM. Kudella
dc.contributor.authorH. Oumeraci
dc.contributor.authorM. B. de Groot
dc.contributor.authorP. Meijers
dc.date.accessioned2017-05-08T21:10:41Z
dc.date.available2017-05-08T21:10:41Z
dc.date.copyrightJuly 2006
dc.date.issued2006
dc.identifier.other%28asce%290733-950x%282006%29132%3A4%28310%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/41629
dc.description.abstractResults of large-scale model experiments in a wave flume are discussed. These experiments are concerned with the study of the generation of transient or instantaneous and residual pore pressure in a seabed beneath a caisson breakwater subjected to both pulsating and breaking wave loads. The simulated seabed and drainage conditions correspond to those encountered in a loose sand bed with thin clay or silt layers. Even under such unfavorable conditions total liquefaction due to residual pore pressures could not occur during the experiments. It is shown that the residual pore pressure is essentially generated by the caisson motions due to breaking wave loads and that they are closely related to residual soil deformations, which may lead to the failure of the breakwater.
dc.publisherAmerican Society of Civil Engineers
dc.titleLarge-Scale Experiments on Pore Pressure Generation underneath a Caisson Breakwater
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue4
dc.journal.titleJournal of Waterway, Port, Coastal, and Ocean Engineering
dc.identifier.doi10.1061/(ASCE)0733-950X(2006)132:4(310)
dc.treeJournal of Waterway, Port, Coastal, and Ocean Engineering:;2006:;Volume ( 132 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record