Show simple item record

dc.contributor.authorJianhua Jiang
dc.contributor.authorNeil K. Ganju
dc.contributor.authorAshish J. Mehta
dc.date.accessioned2017-05-08T21:10:32Z
dc.date.available2017-05-08T21:10:32Z
dc.date.copyrightJuly 2004
dc.date.issued2004
dc.identifier.other%28asce%290733-950x%282004%29130%3A4%28215%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/41535
dc.description.abstractContraction scour in a firm-clay estuarine riverbed is estimated at an oil-unloading terminal at the Port of Haldia in India, where a scour hole attained a maximum depth greater than 5 m relative to the original bottom. A linear equation for the erosion flux as a function of the excess bed shear stress was semicalibrated in a rotating-cylinder device called SERF (Simulator of Erosion Rate Function) and coupled to a hydrodynamic code to simulate the hole as a clear-water scour process. SERF, whose essential design is based on previous such devices, additionally included a load cell for in situ and rapid measurement of the eroded sediment mass. Based on SERF’s performance and the degree of comparison between measured and simulated hole geometry, it appears that this device holds promise as a simple tool for prediction of scour in firm-clay beds.
dc.publisherAmerican Society of Civil Engineers
dc.titleEstimation of Contraction Scour in Riverbed Using SERF
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue4
dc.journal.titleJournal of Waterway, Port, Coastal, and Ocean Engineering
dc.identifier.doi10.1061/(ASCE)0733-950X(2004)130:4(215)
dc.treeJournal of Waterway, Port, Coastal, and Ocean Engineering:;2004:;Volume ( 130 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record