Show simple item record

dc.contributor.authorLuigi Natale
dc.contributor.authorFabrizio Savi
dc.date.accessioned2017-05-08T21:10:18Z
dc.date.available2017-05-08T21:10:18Z
dc.date.copyrightDecember 2000
dc.date.issued2000
dc.identifier.other%28asce%290733-950x%282000%29126%3A6%28274%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/41359
dc.description.abstractA mathematical model is developed to simulate the filling/emptying of navigation locks and to compute the stress on mooring lines of barges during lockage. The model, verified for different filling and emptying systems (end-filling systems with valves-in-gate or loop culverts and wall culverts with side-ports), reproduces satisfactorily the hydraulic transient generated in the lock chamber and the hawser force. A procedure is proposed to design the optimal valve operation for end-filling systems, which gives the minimum lockage time, keeping the hawser force below the admissible value. It is concluded that valving at a progressively increasing rate diminishes the lockage time in comparison to a valve operated at a constant rate.
dc.publisherAmerican Society of Civil Engineers
dc.titleMinimization of Filling and Emptying Time for Navigation Locks
dc.typeJournal Paper
dc.journal.volume126
dc.journal.issue6
dc.journal.titleJournal of Waterway, Port, Coastal, and Ocean Engineering
dc.identifier.doi10.1061/(ASCE)0733-950X(2000)126:6(274)
dc.treeJournal of Waterway, Port, Coastal, and Ocean Engineering:;2000:;Volume ( 126 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record