Show simple item record

dc.contributor.authorB. Raubenheimer
dc.contributor.authorSteve Elgar
dc.contributor.authorR. T. Guza
dc.date.accessioned2017-05-08T21:10:06Z
dc.date.available2017-05-08T21:10:06Z
dc.date.copyrightMay 1998
dc.date.issued1998
dc.identifier.other%28asce%290733-950x%281998%29124%3A3%28151%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/41244
dc.description.abstractComparison of predicted with observed attenuation of pressure fluctuations shows that wave heights can be estimated with observations from a pressure sensor that is buried a known depth in fine sand. The attenuation of pressure fluctuations within the sand bed under unbroken shoaling waves, bores in the surf zone, and swash near the shoreline was measured with vertical stacks of buried pressure sensors. The attenuation increased with increasing frequency and depth below the bed surface, consistent with previous observations under nonbreaking waves in deeper water and with model predictions based on poro-elastic theory. In the limit of an infinitely deep soil skeleton that is much more compressible than the pore fluid, the predicted pressure fluctuations decrease exponentially with increasing burial depth, and the attenuation is independent of the sediment properties. For the fine-grained sand beds considered here, this exponential limit accurately predicts the observed attenuation.
dc.publisherAmerican Society of Civil Engineers
dc.titleEstimating Wave Heights from Pressure Measured in Sand Bed
dc.typeJournal Paper
dc.journal.volume124
dc.journal.issue3
dc.journal.titleJournal of Waterway, Port, Coastal, and Ocean Engineering
dc.identifier.doi10.1061/(ASCE)0733-950X(1998)124:3(151)
dc.treeJournal of Waterway, Port, Coastal, and Ocean Engineering:;1998:;Volume ( 124 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record