Show simple item record

dc.contributor.authorAdam Bezuijen
dc.contributor.authorMark Klein Breteler
dc.date.accessioned2017-05-08T21:09:58Z
dc.date.available2017-05-08T21:09:58Z
dc.date.copyrightNovember 1996
dc.date.issued1996
dc.identifier.other%28asce%290733-950x%281996%29122%3A6%28281%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/41166
dc.description.abstractDesign formulas for placed block revetments are evaluated. The various formulas, as published in literature, have a different background or are based on different experiments. Most formulas are based on an analytical solution of a ground-water flow equation for the flow in the filter layer and a schematized pressure distribution on the slope due to wave attack. Empirical formulas describing the wave pressure distribution as a function of wave height, wave steepness, and slope are presented. The pressure distribution used was based on experiments with regular waves. Recent experiments provide the opportunity to improve the wave pressure distribution, using the results of irregular waves. The resulting design formulas are described. These design formulas are based on laminar flow. The influence of turbulent flow is investigated. The formulas are used in a calculation example. It is shown that the permeabilities of cover layer and filter layer are very important for the maximum wave height the revetment can withstand.
dc.publisherAmerican Society of Civil Engineers
dc.titleDesign Formulas for Block Revetments
dc.typeJournal Paper
dc.journal.volume122
dc.journal.issue6
dc.journal.titleJournal of Waterway, Port, Coastal, and Ocean Engineering
dc.identifier.doi10.1061/(ASCE)0733-950X(1996)122:6(281)
dc.treeJournal of Waterway, Port, Coastal, and Ocean Engineering:;1996:;Volume ( 122 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record