Show simple item record

dc.contributor.authorWilliam G. McDougal
dc.contributor.authorA. Neil Williams
dc.contributor.authorKeizo Furukawa
dc.date.accessioned2017-05-08T21:09:55Z
dc.date.available2017-05-08T21:09:55Z
dc.date.copyrightJanuary 1996
dc.date.issued1996
dc.identifier.other%28asce%290733-950x%281996%29122%3A1%2827%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/41123
dc.description.abstractLinearized shallow-water wave theory is used to investigate the interaction of surface waves with multiple rectangular submarine pits in water of otherwise uniform depth. The solution is obtained by a boundary element technique using a two-dimensional Green's function. It is shown that appropriate selection of pit dimensions and placement may lead to a significant reduction in wave heights behind these structures. Numerical results have been presented that illustrate the influence of the various pit characteristics on the diffracted wave field. Two pits can provide a shadow region in which wave heights are reduced to 10–20% of the incident wave height. The shadow region, with wave heights reduced to 30% of the incident wave height, is approximately the width of the pits and five wavelengths long. Guidance is given on how to select pit geometries and placement for optimal breakwater performance. An example is also presented that shows how to select a pit to reduce wave heights in a navigation channel.
dc.publisherAmerican Society of Civil Engineers
dc.titleMultiple-Pit Breakwaters
dc.typeJournal Paper
dc.journal.volume122
dc.journal.issue1
dc.journal.titleJournal of Waterway, Port, Coastal, and Ocean Engineering
dc.identifier.doi10.1061/(ASCE)0733-950X(1996)122:1(27)
dc.treeJournal of Waterway, Port, Coastal, and Ocean Engineering:;1996:;Volume ( 122 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record