Show simple item record

dc.contributor.authorJ. S. Mani
dc.contributor.authorS. Jayakumar
dc.date.accessioned2017-05-08T21:09:55Z
dc.date.available2017-05-08T21:09:55Z
dc.date.copyrightNovember 1995
dc.date.issued1995
dc.identifier.other%28asce%290733-950x%281995%29121%3A6%28335%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/41121
dc.description.abstractA suspended pipe breakwater was designed specifically for fishery/pleasure-craft harbors where moderate wave agitations in the harbor basin are admissible. The present breakwater consists of a row of closely spaced pipes mounted onto a frame and suspended between the support piles spaced far apart. Experimental studies conducted to determine the wave transmission characteristics indicate that by suspending a row of closely spaced pipes (with a gap to diameter ratio of 0.22 and draft to water depth ratio of 0.46), a 50% reduction in incident-wave height can be achieved. The cost and performance of conventionally adopted pile breakwater (involving a row of closely spaced piles driven on the seabed) were compared with the present system. The comparison revealed that the present system can reduce the investment cost by about 40% and can attenuate waves with the same efficiency as that of a row of closely spaced piles.
dc.publisherAmerican Society of Civil Engineers
dc.titleWave Transmission by Suspended Pipe Breakwater
dc.typeJournal Paper
dc.journal.volume121
dc.journal.issue6
dc.journal.titleJournal of Waterway, Port, Coastal, and Ocean Engineering
dc.identifier.doi10.1061/(ASCE)0733-950X(1995)121:6(335)
dc.treeJournal of Waterway, Port, Coastal, and Ocean Engineering:;1995:;Volume ( 121 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record