Show simple item record

dc.contributor.authorRichard N. Weisman
dc.contributor.authorGerard P. Lennon
dc.date.accessioned2017-05-08T21:09:48Z
dc.date.available2017-05-08T21:09:48Z
dc.date.copyrightSeptember 1994
dc.date.issued1994
dc.identifier.other%28asce%290733-950x%281994%29120%3A5%28468%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/41058
dc.description.abstractFlow emanating from perforations in a buried pipe can be used to fluidize sand in the coastal environment. A trench of specified length, width, and depth can be created by fluidization for applications such as sand bypassing and channel maintenance in tidal inlets and harbor mouths. Over 15 yr of research has culminated in a design methodology for selection of fluidizer pipe diameter; fluidizer hole orientation, size, and spacing; and flow rate and pressure requirements for achieving full fluidization. A complete system requires guidance on the selection of other components, including choice of materials, installation techniques, clear‐water intake, and slurry‐removal mechanism. The design example illustrates how to maintain a 9.14‐m‐ (30‐ft‐) wide, 2.44‐m‐ (8‐ft‐) deep channel in an inlet to a marina.
dc.publisherAmerican Society of Civil Engineers
dc.titleDesign of Fluidizer Systems for Coastal Environment
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue5
dc.journal.titleJournal of Waterway, Port, Coastal, and Ocean Engineering
dc.identifier.doi10.1061/(ASCE)0733-950X(1994)120:5(468)
dc.treeJournal of Waterway, Port, Coastal, and Ocean Engineering:;1994:;Volume ( 120 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record