Show simple item record

dc.contributor.authorJentsje W. van der Meer
dc.contributor.authorCor‐Jan M. Stam
dc.date.accessioned2017-05-08T21:09:37Z
dc.date.available2017-05-08T21:09:37Z
dc.date.copyrightSeptember 1992
dc.date.issued1992
dc.identifier.other%28asce%290733-950x%281992%29118%3A5%28534%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/40966
dc.description.abstractKnowledge on wave‐runup levels is important for a proper design of the crest height of coastal structures. An overall view of the literature supports the assertion that smooth slopes cause the highest possible runup levels. Therefore, various runup data on gentle smooth slopes of coastal structures in a large flume are presented, and a final design formula is given. Then, available data of runup on smooth and rock slopes are compared. The main part of this paper deals with runup on rock slopes, including revetments and breakwater structures. The slopes range from 1:1.5 to 1:4. About 250 tests have been performed, testing stability of armor layers, during which runup was simultaneously measured. First, a qualitative analysis is given on the influence of various parameters on runup. The final analysis results in two sets of design formulas. One set yields formulas for the assessment of various runup levels as a function of the surf similarity or breaker parameter. The other set presents the probability distribution of runup on rock slopes, written as a Weibull distribution.
dc.publisherAmerican Society of Civil Engineers
dc.titleWave Runup on Smooth and Rock Slopes of Coastal Structures
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue5
dc.journal.titleJournal of Waterway, Port, Coastal, and Ocean Engineering
dc.identifier.doi10.1061/(ASCE)0733-950X(1992)118:5(534)
dc.treeJournal of Waterway, Port, Coastal, and Ocean Engineering:;1992:;Volume ( 118 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record