Show simple item record

dc.contributor.authorJerome P.‐Y. Maa
dc.contributor.authorS.‐C. Kim
dc.date.accessioned2017-05-08T21:09:36Z
dc.date.available2017-05-08T21:09:36Z
dc.date.copyrightJuly 1992
dc.date.issued1992
dc.identifier.other%28asce%290733-950x%281992%29118%3A4%28387%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/40957
dc.description.abstractThe effects of bottom friction on the estimation of breaking‐wave heights, breaking locations, and breaking angles, determined by using the RCPWAVE model, were examined. We used direct and a wave‐ray approaches to simulate the effects of energy loss caused by bottom friction. The direct approach requires knowing the wave friction coefficient prior to the calculation, and it did not give promising results. The wave‐ray approach is simple and effective; thus, it is used in this study. Three types of bottom roughness (i.e., grain size, ripple, and movable bed) were considered in the calculation of bottom friction. The numerical experiments showed that bottom friction is important when there is a 2‐ to 5‐km‐wide shallow beach. Bottom friction reduces the breaking‐wave height 30–50%. It also changes the breaking points. The computer codes for the wave‐ray approach are portable, and they can be incorporated with any other wave transformation model to give more realistic results.
dc.publisherAmerican Society of Civil Engineers
dc.titleEffects of Bottom Friction on Wave Breaking Using RCPWAVE Model
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue4
dc.journal.titleJournal of Waterway, Port, Coastal, and Ocean Engineering
dc.identifier.doi10.1061/(ASCE)0733-950X(1992)118:4(387)
dc.treeJournal of Waterway, Port, Coastal, and Ocean Engineering:;1992:;Volume ( 118 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record